Instructions on How to Use the AQUATIZ YA01 Toilet Simply and Effectively

Why is it important to know how to use the AQUATIZ YA01 toilet?

The YA01 toilet is a sanitary ware which is equipped with many advanced and intelligent features, including multiple cleaning modes, warm dryer with different temperature modes, and smart sensor feature. If users do not fully understand how the product operates, they may encounter issues due to false use, leading to:

• Ineffective cleaning: If seated incorrectly, the water jets will not spray in the right direction, causing splashing or poor cleaning.
• Incorrect usage: Not understanding the temperature and water pressure settings can cause discomfort, especially for children and the elderly.
• Reduced equipment lifespan: Incorrect button use or failure to activate features properly can damage the internal components of the YA01 toilet.

Therefore, learning how to use the product properly does not only ensure good hygiene but also helps extend the product’s lifetime, bringing long-term value.

How to Use AQUATIZ YA01 Smart Toilet Remote Control?

In order to know how to use the AQUATIZ YA01 smart toilet, you first need to recognize the main function buttons on the remote control. The YA01 is equipped with a full control panel with the following buttons:

Main Hygiene Functions

• Rear-wash: For hygiene after use
• Pre-wash: For women, washes the pre-area
• Movement Mode: Activated by pressing a second time, the nozzle will move back and forth to expand the washing area
• Water Flow Adjustment: +/- buttons to increase or decrease water pressure
• Wash Bar Position Adjustment: 5 different adjustable levels

Drying and Temperature Control Function

• Drying button: Activates automatic drying mode
• Drying temperature adjustment: From Level 0 (room temperature) to Level 5 (highest)
• Washing water temperature: 6 adjustable levels
• Heated seat temperature: 6 levels from low to high

Flushing Function

• Full flush: Drains all the water
• Partial flush: Drains some of the water
• Automatic flush: Turns on/off by pressing and holding

Toilet Lid Function

• Open/close toilet lid
• Open/close seat
• Automatically open/close when approaching

Other Special Supporting Function

• Night light: Always on, off, or sensor-activated
• Automatic wetting mode: Pre-wash
• Silent mode: Turn off beeping
• Energy saving mode (ECO): Reduces energy consumption
• Plasma sterilization: Automatically shuts off after 2 hours

Detailed User Guide for YA01 Smart Toilet

Below is the detailed instruction on how to use the YA01 smart toilet for beginners.

Step 1: Preparation

Before using, please make sure that:

• The remote control is properly charged with batteries and placed within easy reach when you are seated.
• Do not install or use the remote control in a damp location.
• Avoid placing the remote control in a location where it is likely to be exposed to direct water splashes.

Step 2: When starting to sit

• Sit in the correct posture, with your back straight against the seat to activate the sensor.
• Avoid sitting in an off-center position, as the water jets may not be directed correctly, leading to splashing.

Step 3: Using the washing modes

Rear Wash

• Press the Rear Wash button once to start.
• Press it a second time to activate the Movement Wash mode (the nozzle moves back and forth).
• Adjust the water pressure using the +/– buttons.
• Press STOP (⬛) to stop, or the system will automatically stop after a cycle.

Front wash

• The process is similar to that of Rear Wash, press the Front Wash button.
• Ideal for female users
• Also supports Movement Wash mode

Important tip: After using and standing up, the spray wand will continue to operate for 1-2 seconds. Thus, press the STOP button before leaving the toilet seat to avoid blasting.

Step 4: Warm dryer and temperature adjustment

• Press the [Dry | Dryer Temp] button to turn on the mode
• The indicator light will show the current temperature level.
• Press the drying button again to change the fan speed from Level 0 (room temperature) to Level 5 (highest).
• The system will automatically stop after a cycle or when you leave the chair.

Step 5: Adjust the spray wand’s position

During the washing process, you can adjust the spray nozzle up or down to 5 different positions:

• Press the up arrow button 🔼 to raise the nozzle
• Press the down arrow button 🔽 to lower the nozzle
• Each press will change the position by one level

Step 6: Flushing

Full Flush

• Press the [Full Flush] button to use
• The toilet will flush, using full amount of water each time

Partial Flush

• Press the [Half Flush] button located above the [Full Flush] button.
• The toilet will flush a certain amount of water

Automatic Flush

• Press and hold the flush button (i.e., Full Flush or Partial Flush) to activate the automatic flush mode before using the toilet.
• The toilet will automatically flush after detecting that you have left the seat.

Step 7: Supporting functions

Night Light:

• Press the [Light] button briefly to turn on/off.
• Press and hold to activate smart mode (automatically turns on/off depending on brightness).

Automatic Lid Opening/Closing:

• Press the button to open or close the toilet lid [Open|Close Lid] and seat [Open|Close Seat].
• Press and hold to turn on/off automatic mode when approaching.

Automatic Pre-wash:

• Press and hold the STOP button (⬛) and then press the Full Flush button (💧) to activate it for the first time.
• After that, this function will automatically activate when the sensor detects someone sitting down.

Energy Saving Mode (ECO):

• Press and hold the STOP button (⬛) to turn on and press and hold again to turn off.
• When started, the seat temperature is at level 1.
• The mode will pause when someone is sitting and automatically resume when not in use.

Plasma Disinfection Function:

• Press and hold the [Dry|Dryer Temp.] button to activate the function.
• The function will automatically turn off after 2 hours.
• The system will automatically stop when someone is sitting or when another function is running.

Important Notes to Use the YA01 Smart Toilet Safely

After learning how to use the YA01 smart toilet, users should also pay attention to the following important points to ensure effective use and maintain the product’s durability.

Basic Operation Notice When Using YA01 Toilet

• The device only works after it beeps: If you don’t hear a confirmation beep, the control unit hasn’t signaled. Please adjust the direction and press again.
• Sitting in the correct position: This is mandatory for the water jet to be directed correctly. Sitting off-center will cause water to splash.
• Always press STOP before standing up: The nozzle will continue to spray for an additional 1–2 seconds if you don’t stop in time.

Notes on power or water outages when using the YA01 toilet:

• If the power goes out while you are using the toilet, the bidet nozzle may not retract. Wait until the power is restored.
• If the power outage is prolonged, you can gently push the nozzle back to its original position by hand. Do not use excessive force to avoid damaging the nozzle.

Notes for Installation, Cleaning and Maintaining the YA01 Smart Toilet

• Do not use strong detergents, acids, or alkalis to clean the remote control.
• Use a dry, soft cloth to clean the remote control.
• Do not leave the remote control in areas where it is likely to splash water.
• Do not allow the batteries to get wet or come into contact with steam.
• Do not place the remote control near a standing shower.
• Do not expose the batteries to high humidity.
• Ensure the remote control is within easy reach when seated.

Where to Buy the YA01 Smart Toilet?

The wall-mounted YA01 smart toilet is an advanced sanitary ware with many complex features. If falsely installed, the sensor modes cannot operate correctly, affecting the overall usage. Therefore, choosing a reliable distributor with professional installation service is extremely important.

MAMMA MIA proudly distributes the YA01 toilets because:

• 100% genuine products: Guaranteed original products with all necessary documentation.
• Direct usage instructions: MAMMA MIA technicians will provide detailed instructions on how to use the YA01 smart toilet.
• Proper installation: Our professional team installs according to manufacturer standards.
• Suitable selection advice: We help you choose the right equipment for your bathroom and family needs.

The AQUATIZ YA01 smart toilet is a must-have sanitary ware in modern bathrooms, understanding how to use the product will help you fully utilize all the toilet’s potential.

Contact MAMMA MIA now to get your own YA01 smart toilet and experience the superior benefits!